Excel Metal & Engg  Industries specialize in manufacturing of various grades pipes from 25 years under supervision of technical experts available at affordable cost with no quality compromise. Our Organization is ISO-9001:2008 certified with added advantage of electro polishing, cutting as per customer requirements.

A pipe can be defined as a tubular section or hollow cylinder which is mainly used to transfer substances which can flow liquids and gases, masses of small solids, slurries, powders. Excel Metal & Engg  Industries is well known for pipe manufacturing which follows different national & International industrial standards. A pipe is specified by a schedule that defines the thickness and a nominal diameter with a constant outside diameter (OD).We assure our clients that they are getting premium quality pipe assemblies that are always constructed with the use of fittings such as elbows, tees, etc.

A Tube can be defined as having non-cylindrical sections, i.e., square or rectangular tubing. It is specified by the OD and wall thickness, and can be specified by any two of OD, wall thickness, inside diameter (ID).

Manufacturing Process of Seamless, Welded & ERW 

Seamless (SMLS) pipe is formed by drawing a solid billet over a piercing rod to create the hollow shell. As the manufacturing process of seamless pipes does not include any welding they are more stronger, reliable and can withstand pressure. Welded pipe is formed by rolling plate and welding the seam (by Electric Fusion Welding (“EFW”) or Electric resistance welding (“ERW”)). A scarfing blade can be used to remove the weld flash from both inner and outer surfaces. ERW pipes are manufactured by using High Frequency Induction Technology (HFI).

• Steel Pipes– OD 10.29 mm – 762 mm
• Steel Tubes– OD 6.00 mm – 914.4 mm
• Steel Tubing–  OD 3.00mm – 25.00 mm
• ERW Steel Pipes– OD 21.34 mm – 609.6 mm
• SSAW Steel Pipes– OD 219.08 mm– 2032 mm
• LSAW Steel Pipes– OD406.4 mm- 1625 mm
• Hollow Section Tube– Square Pipes, Rectangular Tubes, Circular Tubes

Production, Supply, Stock Range of Pipes, Tubes & Tubing

Outside Diameter: 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock

Thickness Range:  0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS

Type: Seamless / ERW / Welded / Fabricated / CDW

Form: Round Pipes/Tubes, Square Pipes/Tubes, Rectangular Pipe/Tubes, Coiled Tubes, “U” Shape, Pan Cake Coils, Hydraulic Tubes

Length: Single Random, Double Random & Required Length End: Plain End, Beveled End, Treaded

End Protection: Plastic Caps | Outside Finish: 2B, No.4, No.1, No.8 Mirror Finish for Stainless Steel Pipes, Finish as per customer Requirements

Delivery Condition: Annealed and Pickled, Polished, Bright Annealed, Cold Drawn

Inspection, Test Reports: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports

Packing: Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests

Specials: Sizes and Specifications other than above can be manufactured on request.

Steel Pipes Specifications

• ASTM A312 : Seamless and straight-seam welded austenitic pipe intended for high temperature and general corrosive service. Filler metal not permitted during welding.
• ASTM A790 : Seamless and straight-seam welded ferritic/austenitic (duplex) pipe intended for general corrosive service, with a particular emphasis on resistance to stress corrosion cracking.
• ASTM A409 : Straight-seam or spiral-seam Electric Fusion welded large diameter austenitic light-wall pipe in sizes 14” to 30” with walls Sch 5S and Sch 10S for corrosive and/or high
• ASTM A376 : Seamless austenitic pipe for high temperature applications.
• ASTM A358 : Electric Fusion Welded Austenitic Pipe for corrosive and/or high temperature service. Typically only pipe up to 8 inch is produced to this specification. Addition of filler metal is permitted during welding.
• ASTM A813 : Single-seam, single- or double- welded austenitic pipe for high temperature and general corrosive applications.
• ASTM A814 : Cold-worked welded austenitic pipe for high temperature and general corrosive service.

Pipes  Applications

Our steel pipes find their usage in field of chemical processing, marine and for manufacturing equipment’s to be used for highly corrosive operating conditions.

• PETROCHEMICALS
• POWER PLANTS
• NUCLEAR
• WATER PIPELINES
• CONSTRUCTIONS
• SHIPBUILDING
• REFINERIES
• DAIRIES & BREWERIES
• FOOD & BEVERAGES
• SUGAR MILLS
• PHARMACEUTICALS
• PAPER & PULP 
• INDUSTRIES 
• TEXTILES
• AUTOMOBILES
• ARCHITECTURAL APPLICATIONS

Quality Assurance and Certifications

Excel Metal & Engg   Industries being a leading manufacturer of Pipes which includes Stainless steel Pipes, copper nickel pipes, monel pipes etc., mainly focus on quality assurance of their products in all key steps of manufacturing process involving-selection of raw material, cutting, heating, forming, welding, inspection and test, coating. Our premium quality Pipes have undergone and approved Material Test Report to certify that each product can overcome condition of pressure, temperature and corrosion. Our products are manufactured as per ASTM, ASME, DIN, MSS, EN and JIS codes.