Copper Nickel Alloy 70/30 Plates & Sheets

Copper Nickel Alloy 70/30 Plates | ASTM B151 UNS C71500 70/30 Plates & Sheets Manufacturer In India

Cupro Nickel 70/30 Plates & Sheets Coils | Cu-Ni 70/30 Plates & Sheets Coils Exporter | ASTM B171 UNS C71500 70/30 Plates & Sheets

Being an established association, Champak Steel and Engg. Co. are putting forth a colossal scope of Copper Nickel 70/30 Plates & Sheets. The offered Copper Nickel 70/30 Plates & Sheets is fabricated under the direction of specialists by utilizing predominant quality copper. Our Copper Nickel 70/30 Plates & Sheets is checked by specialists on various parameters with a specific end goal to convey a defect free range. This Copper Nickel 70/30 Plates & Sheets is exceedingly refreshing for their corrosion resistance, rigidity and cost viability.

Champak Steel and Engg. Co. provides Copper Nickel 70/30 Plates & Sheets which has some of the best features such as Excellent mechanical & magnetic properties, High thermal & electrical conductivity and Anti corrosive.

These 70/30 Cu-Ni Plates & Sheets in accessible diverse evaluations, detail and thickness according to the customers necessities. These are broadly utilized as a part of different application industry, for example, Cement industry, Power Industry, Sugar Mills, Chemical Plants, Pharmaceuticals and so on.

Specification

Standard ASTM B171, ASME SB171
Grades CU-NI-70/30 (UNS No C71500)
Werkstoff Nr 2.0882
Production Hot-Rolled (HR) / Cold-Rolled (CR)
Thickness 1mm – 100mm
Width 1000mm – 3000mm
Application Chemicals & Fertilizers Industries , Sugar Mills , Cement Industries , Ship Building , Paper Industries , Oil & Gas , Petrochemicals , etc

 

Chemical Composition

Grade Element
Copper, Cu 70.0
Nickel, Ni 30.0

 

Mechanical Properties

Properties Metric Imperial
Tensile strength, ultimate 372-517 MPa 54000-75000 psi
Tensile strength, yield (depending on temper) 88.0-483 MPa 12800-70100 psi
Elongation at break (in 381 mm) 45.0% 45.0%
Charpy impact 107 J 78.9 ft-lb
Machinability (UNS C36000 (free-cutting brass) = 100%) 20% 20%
Shear modulus 57.0 GPa 8270 ksi
Poisson’s ratio 0.34 0.34
Elastic modulus 150 GPa 21800 ksi

 

Physical Properties

Properties Metric Imperial
Density 8.94 g/cm3 0.323 lb/in3
Melting point 2140°F 1171°C